Anslut 018965 Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Luz exterior Anslut 018965. Anslut 018965 20 páginas. Outdoor luminaire

Imprimir página
3.
Connect the wires to the terminal block
as follows:
Brown
Yellow/green
Blue
4.
Check that the gasket in the junction box
is correctly place in the slot in the lid.
5.
Fasten the lid with the 6 screws.
NOTE:
The lamp should be installed by an
authorised electrician.

REMOVING THE LED MODULE

1.
Remove the four screws on the front.
FIG. 1
2.
Remove the glass and reflector.
FIG. 2
3.
Remove the four screws holding the LED
module.
FIG. 3
4.
Cut the wire to the LED module.
5.
Remove the LED module.
FIG. 4
L - Live wire
- Earth
N - Neutral wire
EN
11