- ページ 11
屋外ライト Anslut 018965のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Anslut 018965 20 ページ。 Outdoor luminaire
ページを印刷する3.
Connect the wires to the terminal block
as follows:
Brown
Yellow/green
Blue
4.
Check that the gasket in the junction box
is correctly place in the slot in the lid.
5.
Fasten the lid with the 6 screws.
NOTE:
The lamp should be installed by an
authorised electrician.
REMOVING THE LED MODULE
1.
Remove the four screws on the front.
FIG. 1
2.
Remove the glass and reflector.
FIG. 2
3.
Remove the four screws holding the LED
module.
FIG. 3
4.
Cut the wire to the LED module.
5.
Remove the LED module.
FIG. 4
L - Live wire
- Earth
N - Neutral wire
EN
11