Anslut 018965 Руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Наружное освещение Anslut 018965. Anslut 018965 20 страниц. Outdoor luminaire

Печатать страницу
3.
Connect the wires to the terminal block
as follows:
Brown
Yellow/green
Blue
4.
Check that the gasket in the junction box
is correctly place in the slot in the lid.
5.
Fasten the lid with the 6 screws.
NOTE:
The lamp should be installed by an
authorised electrician.

REMOVING THE LED MODULE

1.
Remove the four screws on the front.
FIG. 1
2.
Remove the glass and reflector.
FIG. 2
3.
Remove the four screws holding the LED
module.
FIG. 3
4.
Cut the wire to the LED module.
5.
Remove the LED module.
FIG. 4
L - Live wire
- Earth
N - Neutral wire
EN
11