Auber WS-1500EBPM Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Controlador de temperatura Auber WS-1500EBPM. Auber WS-1500EBPM 19 páginas. Ws series precision pid temperature controller

Imprimir página

 Turn on the controller to make sure the controller powers up properly, and the

temperature display is in the range expected. Then, turn off the controller.

 Plug the heater to the back of the controller. If the heater has a switch, put it in the

off position. Put the sensor inside the container to be controlled.

 Turn on the controller.

 Turn on the heating device.

Remark The connector of sensor contains a slot for correct pin connection. It also has a

spring lock to prevent disconnections from accidental pulling on the cable. The following

pictures show how to install and remove it.

Figure 4. How to install the sensor.