Auber WS-1500EBPM 사용 설명서 - 페이지 5

{카테고리_이름} Auber WS-1500EBPM에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Auber WS-1500EBPM 19 페이지. Ws series precision pid temperature controller

 Turn on the controller to make sure the controller powers up properly, and the

temperature display is in the range expected. Then, turn off the controller.

 Plug the heater to the back of the controller. If the heater has a switch, put it in the

off position. Put the sensor inside the container to be controlled.

 Turn on the controller.

 Turn on the heating device.

Remark The connector of sensor contains a slot for correct pin connection. It also has a

spring lock to prevent disconnections from accidental pulling on the cable. The following

pictures show how to install and remove it.

Figure 4. How to install the sensor.