Auber WS-1500EBPM Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Регулятор температури Auber WS-1500EBPM. Auber WS-1500EBPM 19 сторінок. Ws series precision pid temperature controller

Друкувати сторінку

 Turn on the controller to make sure the controller powers up properly, and the

temperature display is in the range expected. Then, turn off the controller.

 Plug the heater to the back of the controller. If the heater has a switch, put it in the

off position. Put the sensor inside the container to be controlled.

 Turn on the controller.

 Turn on the heating device.

Remark The connector of sensor contains a slot for correct pin connection. It also has a

spring lock to prevent disconnections from accidental pulling on the cable. The following

pictures show how to install and remove it.

Figure 4. How to install the sensor.