Duerkopp Adler 579 Manual de instrucciones de instalación - Página 4

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Máquina de coser Duerkopp Adler 579. Duerkopp Adler 579 9 páginas.

Installing the machine

3.1

3.2

The working height is continuously adjustable between 85 and 120 cm

(measured to the upper edge of the table plate).

Undo locking screws 1 and 2 on both sides of the stand.

–

Adjust the table of the machine to the required working height.

–

Tighten locking screws 1 and 2.

–

Insert the reel stand 3 in the hole in the table plate and secure it

–

with the nuts and washers.

Fit and align the yarn-reel bracket 5 and unwinding arm 3 as

–

shown in the illustration.

NB: the yarn-reel holder and the unwinding arm must be vertically

in line.

Depending on the type of yarn reel the centring piece 6 must be

–

set as shown in the above illustration. Incorrect settings may lead

to faults in operation.