Duerkopp Adler 579 Manuale di istruzioni per l'installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Macchina da cucire Duerkopp Adler 579. Duerkopp Adler 579 9.

Installing the machine

3.1

3.2

The working height is continuously adjustable between 85 and 120 cm

(measured to the upper edge of the table plate).

Undo locking screws 1 and 2 on both sides of the stand.

–

Adjust the table of the machine to the required working height.

–

Tighten locking screws 1 and 2.

–

Insert the reel stand 3 in the hole in the table plate and secure it

–

with the nuts and washers.

Fit and align the yarn-reel bracket 5 and unwinding arm 3 as

–

shown in the illustration.

NB: the yarn-reel holder and the unwinding arm must be vertically

in line.

Depending on the type of yarn reel the centring piece 6 must be

–

set as shown in the above illustration. Incorrect settings may lead

to faults in operation.