Duerkopp Adler 579 Handleiding voor installatie-instructies - Pagina 4
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Duerkopp Adler 579. Duerkopp Adler 579 9 pagina's.
3.
Installing the machine
3.1
Adjusting the working height
3.2
Attaching the yarn stand
6
4
The working height is continuously adjustable between 85 and 120 cm
(measured to the upper edge of the table plate).
Undo locking screws 1 and 2 on both sides of the stand.
–
Adjust the table of the machine to the required working height.
–
Tighten locking screws 1 and 2.
–
Insert the reel stand 3 in the hole in the table plate and secure it
–
with the nuts and washers.
Fit and align the yarn-reel bracket 5 and unwinding arm 3 as
–
4
shown in the illustration.
NB: the yarn-reel holder and the unwinding arm must be vertically
in line.
3
Depending on the type of yarn reel the centring piece 6 must be
–
set as shown in the above illustration. Incorrect settings may lead
to faults in operation.
5
1
2
3
6