Danfoss DEVIreg Multi Manual de instalación - Página 4
Navegue en línea o descargue pdf Manual de instalación para Termostato Danfoss DEVIreg Multi. Danfoss DEVIreg Multi 16 páginas. Self-limiting cables on drum
También para Danfoss DEVIreg Multi: Manual de instalación (12 páginas)
Imprimir página
The product complies with the EN/IEC Standard "Automatic
electrical controls for household and similar use":
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-9 (thermostat)
1�1
Safety instructions
Make sure the mains supply to the thermostat is turned off
before installation.
Important: When the thermostat is used to control a floor
heating element in connection with a wooden floor or
similar material, always use a floor sensor and never set the
maximum floor temperature to more than 35°C.
Please also note the following:
• The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
• The thermostat must be connected to a power supply
via an all-pole disconnection switch.
• The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
• Always connect the thermostat to continuous power
supply.
• Do not expose the thermostat to moisture, water, dust,
and excessive heat.
4
DEVIreg™ 530M
Installation Guide