Danfoss DEVIreg Multi Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу для Терморегулятор Danfoss DEVIreg Multi. Danfoss DEVIreg Multi 16 сторінок. Self-limiting cables on drum
Також для Danfoss DEVIreg Multi: Посібник з монтажу (12 сторінок)

Danfoss DEVIreg Multi Посібник з монтажу
The product complies with the EN/IEC Standard "Automatic
electrical controls for household and similar use":
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-9 (thermostat)
1�1

Safety instructions

Make sure the mains supply to the thermostat is turned off
before installation.
Important: When the thermostat is used to control a floor
heating element in connection with a wooden floor or
similar material, always use a floor sensor and never set the
maximum floor temperature to more than 35°C.
Please also note the following:
• The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
• The thermostat must be connected to a power supply
via an all-pole disconnection switch.
• The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
• Always connect the thermostat to continuous power
supply.
• Do not expose the thermostat to moisture, water, dust,
and excessive heat.
4
DEVIreg™ 530M
Installation Guide