Constellation audio Virgo Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Amplificador Constellation audio Virgo. Constellation audio Virgo 18 páginas.

Power supply connections

9. AC input

This AC input accepts standard 15-amp IEC-type power cords. You may use the high-quality power cord

supplied with the Virgo II, or substitute an aftermarket power cord if you wish.

10. Power outputs

These cables connect to the power inputs of the Virgo II preamp. These are special spiral-wrapped, gold-plated

copper cables designed for aerospace use. Each one is rated to handle 30 amps.

Each of these cables mates with a matching jack on the preamp. Be sure to connect the Analog Right power

cable from the supply to the Analog Right jack on the preamp, the Analog Left power cable from the supply to

the Analog Left jack on the preamp, and the Control power cable from the supply to the Control power jack on

the preamp.

Before connecting these cables, switch off the power supply and disconnect it from the AC power. Failing to do

this can damage the Virgo II or the power supply.