Constellation audio Virgo Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Amplificador Constellation audio Virgo. Constellation audio Virgo 18 páginas.

15. Standby/power

Push this button to turn the Virgo II on and off. When you turn the unit on, it will take a few seconds for the

power supply and preamp to warm up. When the Virgo II is ready for use, its LCD screen will show the most

recently selected input. To put the unit in Standby mode—which will silence the audio but keep the power

supply on so the unit stays warmed up—press this button again after turning on the power.

Hold this button down for 5 seconds to turn the Virgo II off. The unit will enter cool-down mode for 10 seconds.

During cool-down, no buttons on the unit or remote will operate.

16. Multifunction button

The multifunction button serves different functions depending on which control screen is shown. A label on the

LCD display will show the function of the button.

17. Mute

Press this button to silence the audio temporarily. Because the Virgo II uses a relay to perform the Mute

function, it may take a second or so for this control to respond. The volume numbers on the LCD will flash

when the preamp is in Mute mode. Press the button again to restore the sound.