Constellation audio Virgo Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Amplificador Constellation audio Virgo. Constellation audio Virgo 18 páginas.

Controls / displays / indicators

11 – 17. Front panel controls

The front panel includes an LCD touchscreen and two knobs plus five buttons positioned underneath the

display. These buttons allow you to control the Virgo II without its remote. The functions of the buttons are

shown using icons on the Here are the functions of the buttons and knobs:

11. Balance

This knob adjusts left-to-right balance when an input screen is displayed—i.e., when an input is selected. Turn

the knob counterclockwise to shift the balance to the left, clockwise to shift the balance to the right. An

onscreen indicator will indicate if the balance is centered or how far it is shifted to one side or the other.

NOTE: The light-dependent resistors used in the volume control reach optimal performance only after warm-up.

If the preamp has not warmed up for 15 to 30 minutes after initial power-on, you may notice a slight balance

difference between left and right channels. This can easily be corrected with the balance control.

12. Volume

The volume control is always active when the Virgo II is powered up and the mute is deactivated. Note that the

control is calibrated in negative decibels (-dB), reaching maximum volume at 0.0 dB and minimum at -99.0 dB.

Thus, when you turn the volume up (clockwise), the number on the front display will decrease. When you turn

the volume down (counterclockwise), the number will increase. The adjustments steps are in 1 dB increments

between -99.0 dB and -50.0 dB, and 0.5 dB increments from -49.5 dB to 0.0 dB.

13. Home

This button brings you to the input select screen no matter which control screen you are currently viewing.

14. Return/back

This button brings you back to the previous control screen. For example, from any input's screen, such as XLR

1, it will take you back to the input selector screen.