Appareo STRATUS ESG Manual - Página 2
Navegue en línea o descargue pdf Manual para Radio marítima Appareo STRATUS ESG. Appareo STRATUS ESG 9 páginas. Portable receiver connector plate
También para Appareo STRATUS ESG: Manual del piloto (13 páginas), Manual de instalación (5 páginas)
Imprimir página
Bezel Height
Rack Width
Rack Height
Depth*
*Depth from back of bezel to end of strain relief on rack (not compensating for wire
bend radius)
What types of altitude encoders work with Stratus ES/ESG?
The altitude encoder must meet the performance requirements of TSO-C88 (a
or b). Serial altitude encoders must have Trimble/Garmin or Shadin/RMS
protocol.
Most parallel grey code encoders will work with Stratus ES/ESG. Most ACK
and Trans-Cal encoders will also work, but their capabilities depend on the
model.
• ACK models A-30.1 through A-30.5 are parallel encoders only. The last digit
in these models indicates what Mod level they are. We recommend replacing
any Mod 1-3 and using a Mod 4-5 or update to Mod 8-9.
• ACK models A-30.8 through A-30.9 are both parallel and serial encoders. If
these are existing encoders being re-used, confirm what they are internally
configured for and change it to 9600 baud rate. See configuration
requirements listed below.
1.69 inches (43 mm)
6.32 inches (160.4 mm)
1.65 inches (42 mm)
10.75 inches (273 mm)