Appareo STRATUS ESG 매뉴얼 - 페이지 2

{카테고리_이름} Appareo STRATUS ESG에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Appareo STRATUS ESG 9 페이지. Portable receiver connector plate
Appareo STRATUS ESG에 대해서도 마찬가지입니다: 파일럿 매뉴얼 (13 페이지), 설치 매뉴얼 (5 페이지)

페이지 인쇄

Bezel Height

Rack Width

Rack Height

Depth*

*Depth from back of bezel to end of strain relief on rack (not compensating for wire

bend radius)

What types of altitude encoders work with Stratus ES/ESG?

The altitude encoder must meet the performance requirements of TSO-C88 (a

or b). Serial altitude encoders must have Trimble/Garmin or Shadin/RMS

protocol.

Most parallel grey code encoders will work with Stratus ES/ESG. Most ACK

and Trans-Cal encoders will also work, but their capabilities depend on the

model.

• ACK models A-30.1 through A-30.5 are parallel encoders only. The last digit

in these models indicates what Mod level they are. We recommend replacing

any Mod 1-3 and using a Mod 4-5 or update to Mod 8-9.

• ACK models A-30.8 through A-30.9 are both parallel and serial encoders. If

these are existing encoders being re-used, confirm what they are internally

configured for and change it to 9600 baud rate. See configuration

requirements listed below.

1.69 inches (43 mm)

6.32 inches (160.4 mm)

1.65 inches (42 mm)

10.75 inches (273 mm)