Appareo STRATUS ESG Manuel - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Appareo STRATUS ESG. Appareo STRATUS ESG 9 pages. Portable receiver connector plate
Également pour Appareo STRATUS ESG : Manuel du pilote (13 pages), Manuel d'installation (5 pages)
Imprimer la page
Bezel Height
Rack Width
Rack Height
Depth*
*Depth from back of bezel to end of strain relief on rack (not compensating for wire
bend radius)
What types of altitude encoders work with Stratus ES/ESG?
The altitude encoder must meet the performance requirements of TSO-C88 (a
or b). Serial altitude encoders must have Trimble/Garmin or Shadin/RMS
protocol.
Most parallel grey code encoders will work with Stratus ES/ESG. Most ACK
and Trans-Cal encoders will also work, but their capabilities depend on the
model.
• ACK models A-30.1 through A-30.5 are parallel encoders only. The last digit
in these models indicates what Mod level they are. We recommend replacing
any Mod 1-3 and using a Mod 4-5 or update to Mod 8-9.
• ACK models A-30.8 through A-30.9 are both parallel and serial encoders. If
these are existing encoders being re-used, confirm what they are internally
configured for and change it to 9600 baud rate. See configuration
requirements listed below.
1.69 inches (43 mm)
6.32 inches (160.4 mm)
1.65 inches (42 mm)
10.75 inches (273 mm)