Gage Bilt GB752 Información sobre la herramienta de instalación - Página 9

Navegue en línea o descargue pdf Información sobre la herramienta de instalación para Remachadoras Gage Bilt GB752. Gage Bilt GB752 13 páginas.
También para Gage Bilt GB752: Manual de instrucciones original (20 páginas), Información sobre la herramienta de instalación (12 páginas)

HEAD

WARNING:

Dispose of hydraulic oil in accordance with all environmental regulations applicable in your area.

Remove nose assembly and adapter from tool before attempting disassembly of head assy.

Remove end cap (752313). Push against threaded end of piston (752507) to slide it out of head cylinder assy (752119). Be careful not

to damage threads or cause burrs on polished piston (752507) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque

the button head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

S/N: 3210 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

REV.11/14