Gage Bilt GB752 Installation Tool Information - Page 9
Parcourez en ligne ou téléchargez le pdf Installation Tool Information pour {nom_de_la_catégorie} Gage Bilt GB752. Gage Bilt GB752 13 pages.
Également pour Gage Bilt GB752 : Manuel d'instructions original (20 pages), Installation Tool Information (12 pages)
Imprimer la page
HEAD
WARNING:
Dispose of hydraulic oil in accordance with all environmental regulations applicable in your area.
Remove nose assembly and adapter from tool before attempting disassembly of head assy.
Remove end cap (752313). Push against threaded end of piston (752507) to slide it out of head cylinder assy (752119). Be careful not
to damage threads or cause burrs on polished piston (752507) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque
the button head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
S/N: 3210 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
9
REV.11/14