Gage Bilt GB752 Информация об инструментах для установки - Страница 9

Просмотреть онлайн или скачать pdf Информация об инструментах для установки для Заклепочные инструменты Gage Bilt GB752. Gage Bilt GB752 13 страниц.
Также для Gage Bilt GB752: Оригинальное руководство по эксплуатации (20 страниц), Информация об инструментах для установки (12 страниц)

HEAD

WARNING:

Dispose of hydraulic oil in accordance with all environmental regulations applicable in your area.

Remove nose assembly and adapter from tool before attempting disassembly of head assy.

Remove end cap (752313). Push against threaded end of piston (752507) to slide it out of head cylinder assy (752119). Be careful not

to damage threads or cause burrs on polished piston (752507) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque

the button head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

S/N: 3210 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

REV.11/14