Airwell-Fedders Remote Controller Manual de ilustración - Página 3
Navegue en línea o descargue pdf Manual de ilustración para Mando a distancia Airwell-Fedders Remote Controller. Airwell-Fedders Remote Controller 7 páginas. Room air conditioner
Imprimir páginaFeatures of remote control
ON/OFF Button: Push this button to start operation, push
1
the button again to stop operation.
MODE Select Button: Each time you push the button, a mode
2
is selected in a sequence that goes from AUTO COOL
DRY HEAT and FAN, as the following figure indicates:
AUTO
COOL
NOTE: COOL only model has no HEAT feature.
ECO Button: This function is only available on COOL mode.
3
Push this button, the fan will continue to run for another 3
minutes after the compressor shuts off. The fan then cycles
on for 2 minutes at 10 minute intervals until the room
temperature is above the set temperature, at which time the
cooling system turns back on.
TEMP/TIME Button
: Push the
4
indoor temperature setting or to adjust the TIMER in a clockwise
direction. Push the
button to decrease the indoor
DRY
FAN
HEAT
button to increase the
1
COMBINED TIMER
(Setting both ON and OFF timers
simultaneously)
TIMER OFF
(On
This feature is useful when you want to
stop the air conditioner after you go to
bed, and start it again in the morning
when you wake up or when you return
home.
Start
Example:
Stop
On
To stop the air conditioner 2 hours after
setting and start it again 10 hours after
Set
2 hours later
10 hours later
after setting
after setting
setting.
1. Press the TIMER button until the TIMER
2. Use the TEMP/TIME button to display
3. Press the TIMER button again to display
4. Use the TEMP/TIME button to display
5. Wait for 3 seconds until the TIMER ON
To start the air conditioner 5 hours after
setting, and stop it 8 hours after setting.
Start
1. Press the TIMER button, the TIMER ON
Off
Stop
2. Use the TEMP/TIME button to display
Set
5 hours later
8 hours later
after setting
after setting
3. Press the TIMER button again to display
4. Use the TEMP/TIME button to display
5. Wait for 3 seconds until the TIMER OFF
TIMER ON
Stop
Start operation)
OFF indicator is displayed and time setting
is flashing.
"2.0" beside the TIMER OFF display.
the TIMER ON .
"10" beside the TIMER ON display.
time stops flashing and this function
is activated.
TIMER ON
TIMER OFF
(Off
Start
Stop operation)
This feature is useful when you want to start
the air conditioner before you wake up and
stop it after you leave the house.
Example:
displays and the setting time flashes.
"5.0" beside the TIMER ON display of the
remote controller.
the TIMER OFF and the setting time.
"8.0" beside the TIMER OFF display.
time stops flashing and this function
is activated.
10