Airwell-Fedders Remote Controller Manual de ilustración - Página 5

Navegue en línea o descargue pdf Manual de ilustración para Mando a distancia Airwell-Fedders Remote Controller. Airwell-Fedders Remote Controller 7 páginas. Room air conditioner

Imprimir página
Indicators on remote controller
AUTO
CLOCK
CLOCK
SET TEMP.
SET TEMP.
E
ON
ON
F
OFF
OFF
FAN SPEED
FAN SPEED
Transmission Indicator
This transmission indicator lights when
remote controller transmits signals to the
indoor unit.
Mode display
Displays the current operation mode. Including
AUTO(
), COOL(
), DRY(
AUTO
(Not applicable to cooling only models), FAN
ONLY (
)and back to AUTO(
AUTO
ON/OFF display
Displayed by pressing the ON/OFF button.
Press the ON/OFF button again to remove.
Temp. display
Displays the temperature setting (17C /62 F
to 30 C/86 F when you set the operating
mode to FAN ONLY, no temperature setting is
displayed.
Time display
~
Indicate Timer on/off time(0
24 hours)
or clock time.
The clock time is indicated only when no
AUTO-ON/OFF timer is set. When AUTO-
TIMER feature is operating, it displays the
AUTO-ON/OFF time. To check the current
time, press the CLOCK button, and the time
will display.
Fan speed display
Displays the selected fan speed, AUTO
and three fan speed levels "
" (LOW)
"
" (MED) "
" (HIGH)
can be indicated. Displays AUTO when the
operating mode is either AUTO or DRY.
Lock Display
Displayed by pressing the LOCK button.
Press the LOCK button again to remove.
Sleep Display
Displayed by pressing the SLEEP button.
Press the SLEEP button again to remove.
3
Timer operation
), HEAT(
)
).
2
CAUTIONS
.
When you select the timer operation, the remote controller automatically
transmits the timer signal to the indoor unit at the specified time.
Therefore, keep the remote controller in a location from which it can
.
transmit the signal to the indoor unit properly.
The effective operation time set by remote controller is limited in 24 hours.
1. TIMER button
.
Press the TIMER button, the remote
displays 0.0 alongside either the TIMER
ON or TIMER OFF indicator, and will
flash.
2. TEMP/TIME button
Press to set the desired time.
Forward
Backward
.
Press or hold the forward or backward
button to change the Auto time by 0.5
hour increments, up to 10 hours, then
1
at 1 hour increments up to 24 hours.
.
3
The selected time will register in 3nds
after setting.
3. After setting the timer for TIMER ON and
TIMER OFF, check the TIMER indicator
on the display panel of the unit is
illuminated.
Canceling
4. Cancel button(CANCEL)
Press the CANCEL button to cancel
the timer setting.
Changing
Preform steps 1, 2 and 3 to change the
settings.
8