Airwell-Fedders Remote Controller Manual de ilustración - Página 4

Navegue en línea o descargue pdf Manual de ilustración para Mando a distancia Airwell-Fedders Remote Controller. Airwell-Fedders Remote Controller 7 páginas. Room air conditioner

Imprimir página
Example of timer setting
Start
Off
Se t
8 hours later
Stop
On
Set
6 hours later
TIMER ON
(Timer Start Operation)
The TIMER ON feature is useful when
you want the unit to turn on automatically
before say when you return home.
The air conditioner will automatically
start operating at the set time.
IMPORTANT: The time will be registered
within a 3 second period(after pressing
the TEMP/TIME button), so you should
continue pressing the button until the
desired time is established. Otherwise
you must repeat the steps again.
Example:
To start the air conditioner in 8 hours.
1. Press the TIMER button, the TIMER
ON indicator is displayed and the
setting time beside is flashing.
2. Use the TEMP/TIME button to display
"8.0" beside the TIMER ON display
of the remote control.
3. Wait for 3 seconds and the setting time
stops flashing and this function is
activated.
TIMER OFF
(Timer Stop Operation)
The TIMER OFF feature is useful
when you want the unit to turn off
automatically after you go to bed.
The air conditioner will stop auto-
matically at the set time.
Example:
To stop the air conditioner in 6 hours.
1. Press the TIMER button until the
TIMER OFF indicator is displayed
and the setting time beside is flashing.
2. Use the TEMP/TIME button to display
"6.0" beside the TIMER OFF display.
3. This function will be activated after 3
seconds you release the TEMP/TIME
button.
9
Features of remote control(continued)
temperature setting or to adjust the TIMER in a counter-clockwise
direction.
NOTE: Press and hold
and
will alternate the temperature display between the C & F scale.
SLEEP Button: In SLEEP mode, the set temperature will incr-
5
ease by 2 F over the next 30 minutes and by another 2 F after an
additional 30 minutes. This new temperature will be maintained
for 7 hours before it returns to the originally selected temperature.
NOTE: The Sleep mode program can be cancelled at any time
operation by pressing SLEEP button.
RESET Button: When you press the recessed RESET button,
6
all current settings are cancelled and the control will return to
the initial settings.
FAN Button: Used to select the Fan Speed in four steps-
7
AUTO LOW
MED or HIGH. Each time the button is
pressed, the fan speed mode is shifted.
8
TIMER Button: This button is used to preset the time ON
(start to operate) and the time OFF (turn off the operation).
CANCEL Button:
9
(a). If the TIMER ON, TIMER ON OFF or TIMER OFF ON
feature has been set, press the CANCEL button will override
the TIMER program and turn off the unit as well.
(b). If only set TIMER OFF feature, press the CANCEL button
will cancel the timer off setting and turn on the unit (when
the unit is off).
(c). If no TIMER feature has been set, press the CANCEL button,
and nothing will happen.
CLOCK Button: Use to set the time.
10
11
LED Button: Press this button to clear the digit display in the
air conditioner, press it again to activate it .
LOCK Button: When you press the LOCK button, all current
12
settings are locked in and the remote controller does not accept
any operation except that of the LOCK. Press again to cancel
the LOCK mode.
buttons together for 3 seconds
2