Hi-Link HLK-RM04 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Tarjeta de red Hi-Link HLK-RM04. Hi-Link HLK-RM04 18 páginas. Serial to ehthernet
También para Hi-Link HLK-RM04: Manual del usuario (5 páginas), Manual de aplicaciones (12 páginas)

Imprimir página
Hi-Link HLK-RM04 Manual del usuario
configuration page, default user name and password is admin / admin. Modify the network
parameters through the web. Now, the module's IP address is 192.168.16.254. Configuration details
can be seen in 5.1.
3.3

Configurate serial network parameter

Opens the browser http://192.168.16.254/ser2net.asp, enter the serial-to-network web
configuration page. Configure the serial-to-network parameters as needed through a web page.
Configuration details can be seen in 5.2.
4

Parameter configuration direction

The module provides two ways for the configuration parameters：
1.Web page；
2. Serial AT command.
Access to WEB configuration page requires the confirmation of the module's IP addresses, as
well as the user name and password that authenticated by WEB.
Configurating parameters through the serial port AT command needs to make the module into
the AT command mode first.
5

WEB configuration

Through the correct module address,you can access to the WEB configuration page.
5.1

WEB network configuration

Detailed information can refer to<<HI-LINK Router User manual>>
5.2

WEB serial configuration

Serial Web configuration page:192.168.16.245/ser2net.asp is as follows：