Hi-Link HLK-RM04 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Hi-Link HLK-RM04. Hi-Link HLK-RM04 18 pages. Serial to ehthernet
Également pour Hi-Link HLK-RM04 : Manuel de l'utilisateur (5 pages), Manuel d'application (12 pages)

Hi-Link HLK-RM04 Manuel de l'utilisateur
configuration page, default user name and password is admin / admin. Modify the network
parameters through the web. Now, the module's IP address is 192.168.16.254. Configuration details
can be seen in 5.1.
3.3

Configurate serial network parameter

Opens the browser http://192.168.16.254/ser2net.asp, enter the serial-to-network web
configuration page. Configure the serial-to-network parameters as needed through a web page.
Configuration details can be seen in 5.2.
4

Parameter configuration direction

The module provides two ways for the configuration parameters:
1.Web page;
2. Serial AT command.
Access to WEB configuration page requires the confirmation of the module's IP addresses, as
well as the user name and password that authenticated by WEB.
Configurating parameters through the serial port AT command needs to make the module into
the AT command mode first.
5

WEB configuration

Through the correct module address,you can access to the WEB configuration page.
5.1

WEB network configuration

Detailed information can refer to<<HI-LINK Router User manual>>
5.2

WEB serial configuration

Serial Web configuration page:192.168.16.245/ser2net.asp is as follows: