Hi-Link HLK-RM04 사용자 설명서 - 페이지 7

{카테고리_이름} Hi-Link HLK-RM04에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Link HLK-RM04 18 페이지. Serial to ehthernet
Hi-Link HLK-RM04에 대해서도 마찬가지입니다: 사용자 설명서 (5 페이지), 애플리케이션 매뉴얼 (12 페이지)

페이지 인쇄
Hi-Link HLK-RM04 사용자 설명서
configuration page, default user name and password is admin / admin. Modify the network
parameters through the web. Now, the module's IP address is 192.168.16.254. Configuration details
can be seen in 5.1.
3.3

Configurate serial network parameter

Opens the browser http://192.168.16.254/ser2net.asp, enter the serial-to-network web
configuration page. Configure the serial-to-network parameters as needed through a web page.
Configuration details can be seen in 5.2.
4

Parameter configuration direction

The module provides two ways for the configuration parameters：
1.Web page；
2. Serial AT command.
Access to WEB configuration page requires the confirmation of the module's IP addresses, as
well as the user name and password that authenticated by WEB.
Configurating parameters through the serial port AT command needs to make the module into
the AT command mode first.
5

WEB configuration

Through the correct module address,you can access to the WEB configuration page.
5.1

WEB network configuration

Detailed information can refer to<<HI-LINK Router User manual>>
5.2

WEB serial configuration

Serial Web configuration page:192.168.16.245/ser2net.asp is as follows：