DynaColor 960H H.264 DVR Manual de instalación - Página 10

Navegue en línea o descargue pdf Manual de instalación para DVR DynaColor 960H H.264 DVR. DynaColor 960H H.264 DVR 12 páginas.

Connect the DVR via the Remote Software

Setup Requirements:

 Make sure the PC is connected to the Internet.

 Obtain the IP address of the 960H H.264 DVR. To check the IP address of the DVR, click on

MENU and select <System>  <Network Setup>  <LAN Setup>  <IP> to check the IP.

Changing Internet Setting:

The 960H H.264 DVR only supports 32-bit IE browser. However, the DVR does not support IE

browser under WinMetro mode.

 Start the IE; select <Tools> from the main menu of the browser, then <Internet Options> and

then click the <Security> tab.

 Select <Trusted Sites> and click <Sites> to specify its security setting.

 Uncheck "Require server verification (https:) for all sites in this zone". Type the IP address of the

unit in field and click <Add> to add this website to the zone.

 In the Security Level area, click <Custom Level>. Under <ActiveX controls and plug-ins>, set

all items to <Enable> or <Prompt>.

 Click <OK> to accept the settings and close the <Security Settings> screen.

Using the Remote Software:

 Start the IE and enter the IP address of the 960H H.264 DVR in the address bar.

 The ActiveX controls and plug-ins dialog will show up twice for confirmation; click <YES> to

accept ActiveX plug-ins. The DVRRemote plug-ins will be downloaded and installed on the PC

automatically when the connection is successfully made.

NOTE: Do not enter any leading "0" characters in the address, for example,

"192.068.080.006" should be entered as "192.68.80.6".

NOTE: If the default trigger port 80 is changed to another port, e.g. port 81, the IP

address should be entered as "192.68.80.6:81".

 Version verification starts automatically to verify whether DVRRemote was installed. This

process may take up to 30 seconds.

 When the software is completely downloaded and installed, the Login Window is displayed.

 Enter username and password. The default username and password is admin and 1234.