DynaColor 960H H.264 DVR Setup Manual - Page 10

Browse online or download pdf Setup Manual for DVR DynaColor 960H H.264 DVR. DynaColor 960H H.264 DVR 12 pages.

Print Page

Connect the DVR via the Remote Software

Setup Requirements:

 Make sure the PC is connected to the Internet.

 Obtain the IP address of the 960H H.264 DVR. To check the IP address of the DVR, click on

MENU and select <System>  <Network Setup>  <LAN Setup>  <IP> to check the IP.

Changing Internet Setting:

The 960H H.264 DVR only supports 32-bit IE browser. However, the DVR does not support IE

browser under WinMetro mode.

 Start the IE; select <Tools> from the main menu of the browser, then <Internet Options> and

then click the <Security> tab.

 Select <Trusted Sites> and click <Sites> to specify its security setting.

 Uncheck "Require server verification (https:) for all sites in this zone". Type the IP address of the

unit in field and click <Add> to add this website to the zone.

 In the Security Level area, click <Custom Level>. Under <ActiveX controls and plug-ins>, set

all items to <Enable> or <Prompt>.

 Click <OK> to accept the settings and close the <Security Settings> screen.

Using the Remote Software:

 Start the IE and enter the IP address of the 960H H.264 DVR in the address bar.

 The ActiveX controls and plug-ins dialog will show up twice for confirmation; click <YES> to

accept ActiveX plug-ins. The DVRRemote plug-ins will be downloaded and installed on the PC

automatically when the connection is successfully made.

NOTE: Do not enter any leading "0" characters in the address, for example,

"192.068.080.006" should be entered as "192.68.80.6".

NOTE: If the default trigger port 80 is changed to another port, e.g. port 81, the IP

address should be entered as "192.68.80.6:81".

 Version verification starts automatically to verify whether DVRRemote was installed. This

process may take up to 30 seconds.

 When the software is completely downloaded and installed, the Login Window is displayed.

 Enter username and password. The default username and password is admin and 1234.