AGS Mini Merlin Manual de instalación y funcionamiento - Página 12
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Detectores de gas AGS Mini Merlin. AGS Mini Merlin 16 páginas. Ch4 co: dual gas detector methane & carbon monoxide
También para AGS Mini Merlin: Manual del usuario (16 páginas), Instalación Funcionamiento y mantenimiento (20 páginas)
Imprimir página
Installation & Operation Manual
OPERATION
First Power Up
Supply 100-120Vac electrical power
Press and hold the touch button for ~3 seconds.
The device enters a stabilisation phase for approximately one minute – during this period the
device is not yet ready for gas detection.
Touch Button
Turn device on.
Press and hold for ~3 seconds when electrical supply is connected.
Please Note: If your device has been configured to automatically reset – your device will
power up automatically when electrical power is supplied.
Reset the device.
To reset after an alarm - press the touch button once.
Test device outputs.
Press and hold for 3 seconds during normal operation to test screen colouration, audible buzzer
alarm and gas/ BMS relay. This test only proves that the device will operate and activate
connections as intended in the event of dangerous levels of gas being detected.
Device Overview
Please Note: The user can choose whether to have the audible buzzer sound when gas levels
are detected. For more information see section 'Auto Reset & Buzzer Switches'.
Rev: 11 08-20
Mini Merlin
12