AGS Mini Merlin Руководство по установке и эксплуатации - Страница 12

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Детекторы газа AGS Mini Merlin. AGS Mini Merlin 16 страниц. Ch4 co: dual gas detector methane & carbon monoxide
Также для AGS Mini Merlin: Руководство пользователя (16 страниц), Установка, эксплуатация и обслуживание (20 страниц)

Installation & Operation Manual

OPERATION

 Supply 100-120Vac electrical power

 Press and hold the touch button for ~3 seconds.

The device enters a stabilisation phase for approximately one minute – during this period the

device is not yet ready for gas detection.

Turn device on.

Press and hold for ~3 seconds when electrical supply is connected.

Please Note: If your device has been configured to automatically reset – your device will

power up automatically when electrical power is supplied.

Reset the device.

To reset after an alarm - press the touch button once.

Test device outputs.

Press and hold for 3 seconds during normal operation to test screen colouration, audible buzzer

alarm and gas/ BMS relay. This test only proves that the device will operate and activate

connections as intended in the event of dangerous levels of gas being detected.

Please Note: The user can choose whether to have the audible buzzer sound when gas levels

are detected. For more information see section 'Auto Reset & Buzzer Switches'.

Rev: 11 08-20

Mini Merlin