AGS Mini Merlin 설치 및 운영 매뉴얼 - 페이지 12

{카테고리_이름} AGS Mini Merlin에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AGS Mini Merlin 16 페이지. Ch4 co: dual gas detector methane & carbon monoxide
AGS Mini Merlin에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 설치 운영 및 유지보수 (20 페이지)

페이지 인쇄

Installation & Operation Manual

OPERATION

First Power Up

 Supply 100-120Vac electrical power

 Press and hold the touch button for ~3 seconds.

The device enters a stabilisation phase for approximately one minute – during this period the

device is not yet ready for gas detection.

Touch Button

Turn device on.

Press and hold for ~3 seconds when electrical supply is connected.

Please Note: If your device has been configured to automatically reset – your device will

power up automatically when electrical power is supplied.

Reset the device.

To reset after an alarm - press the touch button once.

Test device outputs.

Press and hold for 3 seconds during normal operation to test screen colouration, audible buzzer

alarm and gas/ BMS relay. This test only proves that the device will operate and activate

connections as intended in the event of dangerous levels of gas being detected.

Device Overview

Please Note: The user can choose whether to have the audible buzzer sound when gas levels

are detected. For more information see section 'Auto Reset & Buzzer Switches'.

Rev: 11 08-20

Mini Merlin