AgSense CROP-LINK Instrucciones de cableado - Página 7
Navegue en línea o descargue pdf Instrucciones de cableado para Instrumentos de medida AgSense CROP-LINK. AgSense CROP-LINK 10 páginas. 2012 - 14 soil moisture monitoring
También para AgSense CROP-LINK: Instrucciones de cableado (8 páginas)
Imprimir páginaWiring the Sentek soil moisture probe
Wiring the Sentek probe: Only 1 probe can be connected to this unit at a time.
1. Connect the Blue wire from the Sentek probe to any terminal marked SOIL as shown
above.
2. Connect the Yellow wire from the Sentek probe to any terminal marked GND as shown
above.
3. Connect the Red wire from the Sentek probe to the terminal marked 5V OUT as shown
above.
to the Crop Link Unit
Page 4