AgSense CROP-LINK Wiring Instructions - Page 7

Browse online or download pdf Wiring Instructions for Measuring Instruments AgSense CROP-LINK. AgSense CROP-LINK 10 pages. 2012 - 14 soil moisture monitoring
Also for AgSense CROP-LINK: Wiring Instructions (8 pages)

Print Page

Wiring the Sentek soil moisture probe

Wiring the Sentek probe: Only 1 probe can be connected to this unit at a time.

1. Connect the Blue wire from the Sentek probe to any terminal marked SOIL as shown

above.

2. Connect the Yellow wire from the Sentek probe to any terminal marked GND as shown

above.

3. Connect the Red wire from the Sentek probe to the terminal marked 5V OUT as shown

above.

to the Crop Link Unit

Page 4