Gamma 5003 Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma 5003. Gamma 5003 19 páginas. 6 point mounting
También para Gamma 5003: Manual del usuario (20 páginas), Manual del usuario (20 páginas), Manual del usuario (20 páginas)
Imprimir página
ASSEMBLY INSTRUCTIONS
Base Leg Assembly
The GAMMA 5003 stringing machine uses a four leg
base design. The legs must be assembled to the support
post before use. Remove the lower column support from
the carton. This is the larger of the two posts and has the
GAMMA label.
Note: For illustration purposes, the support column has
been painted white for these instructions.
Align the holes in the leg flange with the matching holes
in the lower column support post. Secure the leg with one
FLAT HEAD cap screw through the upper hole, and one
SOCKET HEAD cap screw through the bottom hole.
Repeat this procedure for the three remaining legs.
Base Foot Height Adjustment
Each foot of the GAMMA 5003 Base Stand can be ad-
justed to compensate for uneven surfaces.
Upper Column Support Assembly
Insert the upper column support into the lower column
support / base leg assembly. Leave the upper column
extended to maximum height and lock in place with the
two set screws located at the top of the lower column
support.
4