Gamma Led Vision TX4 Spot Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Foco Gamma Led Vision TX4 Spot. Gamma Led Vision TX4 Spot 18 páginas. 150w spot moving head

Please refer to the diagram below:

For installations where the DMX cable has to run a long distance or is in an electrically

noisy environment, it is recommended to use a DMX terminator. This helps in preventing

corruption of the digital control signal by electrical noise and reflections. The DMX

terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,

which is then plugged into the output XLR socket of the last fixture in the chain. Please

see illustrations below:

TX4 Spot – GAMMA LED Vision

Page 12 of 18