Gamma Led Vision TX4 Spot Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sorotan Gamma Led Vision TX4 Spot. Gamma Led Vision TX4 Spot 18 halaman. 150w spot moving head

Halaman Cetak

Please refer to the diagram below:

For installations where the DMX cable has to run a long distance or is in an electrically

noisy environment, it is recommended to use a DMX terminator. This helps in preventing

corruption of the digital control signal by electrical noise and reflections. The DMX

terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,

which is then plugged into the output XLR socket of the last fixture in the chain. Please

see illustrations below:

TX4 Spot – GAMMA LED Vision

Page 12 of 18