Gamma Led Vision TX4 Spot 사용자 설명서 - 페이지 12
{카테고리_이름} Gamma Led Vision TX4 Spot에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Led Vision TX4 Spot 18 페이지. 150w spot moving head
페이지 인쇄Please refer to the diagram below:
For installations where the DMX cable has to run a long distance or is in an electrically
noisy environment, it is recommended to use a DMX terminator. This helps in preventing
corruption of the digital control signal by electrical noise and reflections. The DMX
terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,
which is then plugged into the output XLR socket of the last fixture in the chain. Please
see illustrations below:
TX4 Spot – GAMMA LED Vision
Page 12 of 18