HIKVISION HiLook Series Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para DVR HIKVISION HiLook Series. HIKVISION HiLook Series 14 páginas. Smart hybrid light bullet & turret camera
También para HIKVISION HiLook Series: Manual de inicio rápido (18 páginas), Manual del usuario (18 páginas), Manual del usuario (20 páginas), Manual del usuario (18 páginas), Manual del usuario (13 páginas), Manual del usuario (17 páginas)

not, adjust the camera according to the figure

below.

Rotation Position

[0° to 360°]

1). Loosen the trim ring to adjust the pan position

[0° to 360°].

2). Loosen screw A to adjust the tilt position [0° to

180°].

3). Loosen screw B to adjust the rotation position [0°

to 360°].

7. Tighten the trim ring and screws to finish the

installation.

2.1.2 Ceiling/Wall Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.



Ceiling mounting and wall mounting are similar.



Following steps take wall mounting as an example.

Steps:

1. Paste the drill template for junction box to the place

where you want to install the camera.

2. (Optional) For cement wall, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

Figure 2-4 Drill Template for Junction Box

3. (Optional) Drill the cable hole, when the cables are

routed through the wall.

4. Take apart the junction box.

5. Align the screw holes of the camera with those on

the junction box cover. Attach the camera to the

junction box cover with three PM4 × 10 screws.

Figure 2-5 Attach the Camera to the Junction Box Cover

6. Secure the junction box body on the wall with three

PA4 × 25 screws (supplied).

Figure 2-3 3-Axis Adjustment

Pan Position

[0° to 360°]

Trim Ring

Tilt Position

[0° to 180°]

Screw A

Screw B