HIKVISION HiLook Series Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для ВІДЕОРЕЄСТРАТОР HIKVISION HiLook Series. HIKVISION HiLook Series 14 сторінок. Smart hybrid light bullet & turret camera
Також для HIKVISION HiLook Series: Посібник із швидкого старту (18 сторінок), Посібник користувача (18 сторінок), Посібник користувача (20 сторінок), Посібник користувача (18 сторінок), Посібник користувача (13 сторінок), Посібник користувача (17 сторінок)

not, adjust the camera according to the figure

below.

Rotation Position

[0° to 360°]

1). Loosen the trim ring to adjust the pan position

[0° to 360°].

2). Loosen screw A to adjust the tilt position [0° to

180°].

3). Loosen screw B to adjust the rotation position [0°

to 360°].

7. Tighten the trim ring and screws to finish the

installation.

2.1.2 Ceiling/Wall Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.



Ceiling mounting and wall mounting are similar.



Following steps take wall mounting as an example.

Steps:

1. Paste the drill template for junction box to the place

where you want to install the camera.

2. (Optional) For cement wall, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

Figure 2-4 Drill Template for Junction Box

3. (Optional) Drill the cable hole, when the cables are

routed through the wall.

4. Take apart the junction box.

5. Align the screw holes of the camera with those on

the junction box cover. Attach the camera to the

junction box cover with three PM4 × 10 screws.

Figure 2-5 Attach the Camera to the Junction Box Cover

6. Secure the junction box body on the wall with three

PA4 × 25 screws (supplied).

Figure 2-3 3-Axis Adjustment

Pan Position

[0° to 360°]

Trim Ring

Tilt Position

[0° to 180°]

Screw A

Screw B