Avaya 4600 Series Conexión - Página 6
Navegue en línea o descargue pdf Conexión para Teléfono IP Avaya 4600 Series. Avaya 4600 Series 14 páginas. Infrared dialing
También para Avaya 4600 Series: Instrucciones de instalación y seguridad (11 páginas), Instrucciones de seguridad (11 páginas), Información sobre el producto (2 páginas), Manual (4 páginas)
Imprimir página
2.
Configure switch port inline power
1. Click Device View on the Toolbar.
2. Select Physical Interface -> Power -> Configure in the navigation panel;
3. The following window displays the switch default power configuration.
Note that for all ports, Power State is Inactive and Profile is set to Not Guaranteed, as there
are no Powered Devices (PDs) connected to the switch.
The screen lists the following information for all the switch ports:
Power State
The Power over Ethernet status for that port. This can take one of the following values:
• Active — The port is currently delivering power.
• Inactive — No device is currently requesting power from the port.
SZ; Reviewed:
WCH 3/19/2004
Figure 5: Port Inline Power Configuration
Solution & Interoperability Test Lab Application Notes
©2004 Avaya Inc. All Rights Reserved.
6 of 14
3com-PoE-Config.doc