Avaya 4600 Series Connecting - Page 6
Browse online or download pdf Connecting for IP Phone Avaya 4600 Series. Avaya 4600 Series 14 pages. Infrared dialing
Also for Avaya 4600 Series: Installation And Safety Instructions (11 pages), Safety Instructions (11 pages), Product Information (2 pages), Manual (4 pages)
Print Page
2.
Configure switch port inline power
1. Click Device View on the Toolbar.
2. Select Physical Interface -> Power -> Configure in the navigation panel;
3. The following window displays the switch default power configuration.
Note that for all ports, Power State is Inactive and Profile is set to Not Guaranteed, as there
are no Powered Devices (PDs) connected to the switch.
The screen lists the following information for all the switch ports:
Power State
The Power over Ethernet status for that port. This can take one of the following values:
• Active — The port is currently delivering power.
• Inactive — No device is currently requesting power from the port.
SZ; Reviewed:
WCH 3/19/2004
Figure 5: Port Inline Power Configuration
Solution & Interoperability Test Lab Application Notes
©2004 Avaya Inc. All Rights Reserved.
6 of 14
3com-PoE-Config.doc