Avaya 4600 Series Bağlantı - Sayfa 6

IP Telefon Avaya 4600 Series için çevrimiçi göz atın veya pdf Bağlantı indirin. Avaya 4600 Series 14 sayfaları. Infrared dialing
Ayrıca Avaya 4600 Series için: Kurulum ve Güvenlik Talimatları (11 sayfalar), Güvenlik Talimatları (11 sayfalar), Ürün Bilgileri (2 sayfalar), Manuel (4 sayfalar)

Configure switch port inline power

1. Click Device View on the Toolbar.

2. Select Physical Interface -> Power -> Configure in the navigation panel;

3. The following window displays the switch default power configuration.

Note that for all ports, Power State is Inactive and Profile is set to Not Guaranteed, as there

are no Powered Devices (PDs) connected to the switch.

The screen lists the following information for all the switch ports:

Power State

The Power over Ethernet status for that port. This can take one of the following values:

• Active — The port is currently delivering power.

• Inactive — No device is currently requesting power from the port.

SZ; Reviewed:

WCH 3/19/2004

Figure 5: Port Inline Power Configuration

Solution & Interoperability Test Lab Application Notes

6 of 14

3com-PoE-Config.doc