Fujitsu ScanSnap iX500 Manual de introducción - Página 14

Navegue en línea o descargue pdf Manual de introducción para Escáner Fujitsu ScanSnap iX500. Fujitsu ScanSnap iX500 16 páginas. Windows
También para Fujitsu ScanSnap iX500: Manual de introducción (17 páginas), Manual de configuración rápida (3 páginas), Primeros pasos (18 páginas), Precauciones de seguridad (11 páginas), Manual (2 páginas), Manual de inicio rápido (2 páginas), Manual de conexión Wi-Fi (41 páginas)

Scan Test from the Mobile Device

Check that the image scanned by ScanSnap is sent to the mobile device.

Start ScanSnap Connect Application on the mobile device to connect to the ScanSnap.

For details, refer to the ScanSnap Connect Application User's Guide.

Load a document in the ScanSnap.

For details, refer to

Press the [Scan] button on the ScanSnap.

Scanning starts. The scanned image is

displayed on the mobile device when the

scanning is complete.

If the scanned image is displayed on the mobile device, then the scanning check is complete.

ATTENTION

Depending on the ScanSnap installation location, it may take some time until the scanned image is

displayed on the mobile device. For details, refer to "Troubleshooting" in the ScanSnap Manager Help.

If the scanned image is not displayed on the mobile device after the scanning is complete, refer to the

ScanSnap Connect Application User's Guide.

"Scan Test" (page

11).