Fujitsu ScanSnap iX500 Başlangıç Kılavuzu - Sayfa 14

Tarayıcı Fujitsu ScanSnap iX500 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Fujitsu ScanSnap iX500 16 sayfaları. Windows
Ayrıca Fujitsu ScanSnap iX500 için: Başlangıç Kılavuzu (17 sayfalar), Hızlı Kurulum Kılavuzu (3 sayfalar), Başlarken (18 sayfalar), Güvenlik Önlemleri (11 sayfalar), Manuel (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Wi-Fi Bağlantı Kılavuzu (41 sayfalar)

Scan Test from the Mobile Device

Check that the image scanned by ScanSnap is sent to the mobile device.

Start ScanSnap Connect Application on the mobile device to connect to the ScanSnap.

For details, refer to the ScanSnap Connect Application User's Guide.

Load a document in the ScanSnap.

For details, refer to

Press the [Scan] button on the ScanSnap.

Scanning starts. The scanned image is

displayed on the mobile device when the

scanning is complete.

If the scanned image is displayed on the mobile device, then the scanning check is complete.

ATTENTION

Depending on the ScanSnap installation location, it may take some time until the scanned image is

displayed on the mobile device. For details, refer to "Troubleshooting" in the ScanSnap Manager Help.

If the scanned image is not displayed on the mobile device after the scanning is complete, refer to the

ScanSnap Connect Application User's Guide.

"Scan Test" (page

11).