Fujitsu ScanSnap iX500 Getting Started Manual - Page 14

Browse online or download pdf Getting Started Manual for Scanner Fujitsu ScanSnap iX500. Fujitsu ScanSnap iX500 16 pages. Windows
Also for Fujitsu ScanSnap iX500: Getting Started Manual (17 pages), Quick Setup Manual (3 pages), Getting Started (18 pages), Safety Precautions (11 pages), Manual (2 pages), Quick Start Manual (2 pages), Wi-Fi Connection Manual (41 pages)

Print Page

Scan Test from the Mobile Device

Check that the image scanned by ScanSnap is sent to the mobile device.

Start ScanSnap Connect Application on the mobile device to connect to the ScanSnap.

For details, refer to the ScanSnap Connect Application User's Guide.

Load a document in the ScanSnap.

For details, refer to

Press the [Scan] button on the ScanSnap.

Scanning starts. The scanned image is

displayed on the mobile device when the

scanning is complete.

If the scanned image is displayed on the mobile device, then the scanning check is complete.

ATTENTION

Depending on the ScanSnap installation location, it may take some time until the scanned image is

displayed on the mobile device. For details, refer to "Troubleshooting" in the ScanSnap Manager Help.

If the scanned image is not displayed on the mobile device after the scanning is complete, refer to the

ScanSnap Connect Application User's Guide.

"Scan Test" (page

11).