Fujitsu Eternus DX200F Manual de configuración - Página 15

Navegue en línea o descargue pdf Manual de configuración para Almacenamiento Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 38 páginas. Hybrid storage systems, all-flash arrays, power synchronized unit
También para Fujitsu Eternus DX200F: Manual de instrucciones (48 páginas), Manual de instalación (10 páginas), Manual de configuración (28 páginas), Manual de configuración (13 páginas), Manual de configuración (16 páginas), Precauciones de seguridad (12 páginas)

Chapter 3

Notes

3.10

Virtual I/O Server (VIOS) Notes

3.10

Virtual I/O Server (VIOS) Notes

Perform the settings described in this manual only for a VIOS.

•

When performing VIOS settings or installing software, the root privilege for the VIOS environment is re-

quired.

To use a VIOS, ETERNUS Multipath Driver 2 (AIX) or FJSVmpio is required. Install ETERNUS Multipath Driver 2

•

(AIX) or FJSVmpio in the VIOS.

Configuring LVM on the VIOS is not supported.

•

3.11

Set the CSS miscount parameter to a value of 60 or higher.

•

Set "fc_err_recov", an "fscsi" attribute, to "fast_fail".

•

3.12

Added paths may not be automatically recognized if the OS is not rebooted after adding the paths. In that

case, execute the following command.

#cfgmgr

In addition, if Veritas Volume Manager (VxVM) is used, execute the following command.

#vxdctl enable

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX

P3AM-3782-23ENZ0