Fujitsu Eternus DX200F Konfigurationshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Lagerung Fujitsu Eternus DX200F herunter. Fujitsu Eternus DX200F 38 Seiten. Hybrid storage systems, all-flash arrays, power synchronized unit
Auch für Fujitsu Eternus DX200F: Betriebshandbuch (48 seiten), Setup-Handbuch (10 seiten), Konfigurationshandbuch (28 seiten), Konfigurationshandbuch (13 seiten), Konfigurationshandbuch (16 seiten), Sicherheitsvorkehrungen (12 seiten)

Chapter 3

Notes

3.10

Virtual I/O Server (VIOS) Notes

3.10

Virtual I/O Server (VIOS) Notes

Perform the settings described in this manual only for a VIOS.

•

When performing VIOS settings or installing software, the root privilege for the VIOS environment is re-

quired.

To use a VIOS, ETERNUS Multipath Driver 2 (AIX) or FJSVmpio is required. Install ETERNUS Multipath Driver 2

•

(AIX) or FJSVmpio in the VIOS.

Configuring LVM on the VIOS is not supported.

•

3.11

Set the CSS miscount parameter to a value of 60 or higher.

•

Set "fc_err_recov", an "fscsi" attribute, to "fast_fail".

•

3.12

Added paths may not be automatically recognized if the OS is not rebooted after adding the paths. In that

case, execute the following command.

#cfgmgr

In addition, if Veritas Volume Manager (VxVM) is used, execute the following command.

#vxdctl enable

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX

P3AM-3782-23ENZ0