Fujitsu Eternus DX200F Manuale di configurazione - Pagina 15

Sfoglia online o scarica il pdf Manuale di configurazione per Immagazzinamento Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 38. Hybrid storage systems, all-flash arrays, power synchronized unit
Anche per Fujitsu Eternus DX200F: Manuale operativo (48 pagine), Manuale di configurazione (10 pagine), Manuale di configurazione (28 pagine), Manuale di configurazione (13 pagine), Manuale di configurazione (16 pagine), Precauzioni di sicurezza (12 pagine)

Chapter 3

Notes

3.10

Virtual I/O Server (VIOS) Notes

3.10

Virtual I/O Server (VIOS) Notes

Perform the settings described in this manual only for a VIOS.

•

When performing VIOS settings or installing software, the root privilege for the VIOS environment is re-

quired.

To use a VIOS, ETERNUS Multipath Driver 2 (AIX) or FJSVmpio is required. Install ETERNUS Multipath Driver 2

•

(AIX) or FJSVmpio in the VIOS.

Configuring LVM on the VIOS is not supported.

•

3.11

Set the CSS miscount parameter to a value of 60 or higher.

•

Set "fc_err_recov", an "fscsi" attribute, to "fast_fail".

•

3.12

Added paths may not be automatically recognized if the OS is not rebooted after adding the paths. In that

case, execute the following command.

#cfgmgr

In addition, if Veritas Volume Manager (VxVM) is used, execute the following command.

#vxdctl enable

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX

P3AM-3782-23ENZ0