Fujitsu PRIMERGY TX100 S1 Manual del suplemento de servicio - Página 42
Navegue en línea o descargue pdf Manual del suplemento de servicio para Placa base Fujitsu PRIMERGY TX100 S1. Fujitsu PRIMERGY TX100 S1 46 páginas. For tx100 s1
También para Fujitsu PRIMERGY TX100 S1: Especificaciones (13 páginas), Manual de opciones (46 páginas), Manual técnico (32 páginas)
Imprimir página
Replacing the system board
Figure 26: Position of the screws
Ê Remove the five screws from the system board.
Ê Lift the system board slightly using the PCI socket, thereby you lift the
system board out of the centre rings of the spacer bolts.
V
CAUTION!
Never take hold of the heat sinks!
Ê Carefully lift the system board out of the housing in a slight angle. Thereby
you pull the connectors out of the connector panel.
Ê Check the settings on the new system board (for a description see the
Technical Manual of the system board).
Ê Insert the system board by holding it at a slight angle. Slide the connectors
into the connector panel.
V
CAUTION!
Don't damage the EMI springs to comply with applicable EMC regula-
tions and satisfy cooling requirements and fire protection measures.
42
Service Supplement
Replacement routines
TX100 S1