Dell PowerEdge 2400 Instrucciones de instalación de la estantería - Página 28

Navegue en línea o descargue pdf Instrucciones de instalación de la estantería para Servidor Dell PowerEdge 2400. Dell PowerEdge 2400 32 páginas. Wake-on-lan (wol) support on dell servers
También para Dell PowerEdge 2400: Manual de instalación (20 páginas), Manual de instalación (8 páginas), Actualización (2 páginas), Manual de activación (8 páginas), Manual de instalación (8 páginas), Manual de actualización (2 páginas), Manual (15 páginas)

1-16

Dell PowerEdge 2400 Systems Rack Installation Guide

Press up on the green latches and push the chassis into the rack.

7 .

Tighten the thumbscrews on each rack adapter bracket.

Installing the Cable-Management Arm

To install the cable-management arm on the computer, perform the following steps:

Secure the loose end of the cable-management arm to the back vertical rail as

shown in Figure 1-14.

Use one 10-32 x 0.5-inch Phillips-head screw to secure the cable-management

and template arm to the back vertical rail as shown in Figure 1-14. (This is the rail

on the right as you face the back of the rack.) Ensure that the cable-management

arm is straight in relation to the computer—that is, parallel to the ground.

8-32 x 0.313-inch

screws (2)

bracket

vertical rail

10-32 x 0.5-inch

screw

cable-management

arm

Velcro strip

back of computer